/
TWN4 bootloader versions (1.50+) Encoder Installation

TWN4 bootloader versions (1.50+) Encoder Installation

All that is required to be able to use with CardExchange is the firmware update (for the encoder).

This is pretty straight forward.

Download the DevPack from the link below;

TWN4DevPack480.zip

Open the following;

  • The AppBlaster utility.

Ensure the printer is powered up and connected on USB.

Run the AppBlaster application.

Click the Program Firmware Image ,

Click Select Image, Browse to the firmware file required (TWN4_xCx480_PRS104_Multi_CDC_Simple_Protocol.bix)

Click Program Image.

image-20240731-095751.png

Once firmware will be installed, the encoder will reboot;

Close the AppBlaster application.

The printer is now ready to be used with the CardExchange software;

 

Related content

Magicard TWN4 Encoder Installation bootloader versions lower than (1.50)
Magicard TWN4 Encoder Installation bootloader versions lower than (1.50)
More like this
Technical Notes
Technical Notes
Read with this
Tech note 19_04_Install_Elatec_TWN4_ZebraZC_Magicard
Tech note 19_04_Install_Elatec_TWN4_ZebraZC_Magicard
More like this
The CardExchange.ini File Explained
The CardExchange.ini File Explained
More like this
Downloads
More like this
MAGICARD 600 ETHERNET CONNECTION
MAGICARD 600 ETHERNET CONNECTION
More like this