/
Matica MC310 - New Reader Configuration

Matica MC310 - New Reader Configuration

To activate a new reader on the MC310 printer, follow these steps:

  1. Go to Control Panel: Open the Control Panel and navigate to Printers & Scanners.

  2. Select the Printer: Choose the MC310 printer from the list.

  3. Access Printer Properties: Click on Printer Properties.

  4. Go to Tools: Navigate to the Tools tab and select it.

  5. Choose the option “Perform PC/SC encoder check”.

 

image-20240904-083547.png

 

A Pop up will appear to choose the reader to installation.

 

image-20240904-083556.png
  1. Choose the Reader: Select the reader you wish to install from the available options.

  2. Load Card: Click on Load Card to initiate the process.

  3. Read ATR: Perform a Read ATR and verify that the fields below are populated with information.

After completing these steps, the selected reader will be activated.

 

 

Related content

Technote 19/01 - Matica printers installation
Technote 19/01 - Matica printers installation
More like this
Matica XDI 8300 encoder installation and setup
Matica XDI 8300 encoder installation and setup
More like this
Matica MC310 - Parallels Installation
Matica MC310 - Parallels Installation
More like this
MAGICARD 600 ETHERNET CONNECTION
MAGICARD 600 ETHERNET CONNECTION
More like this
Producer Help - Printing Cards - Contactless
Producer Help - Printing Cards - Contactless
More like this
Producer Help - Contactless
Producer Help - Contactless
More like this