Versions Compared

Old Version 2

changes.mady.by.user Goncalo Camacho

Saved on

compared with

New Version Current

changes.mady.by.user Luís Silvério

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Applicable Products:

  • CardExchange® Producer

...

Matica Printers Installation

In order to have the Matica printers XID Series, is needed to install the EdiSecure Connect driver.

It’s available to be downloaded HERE.

As soon as you finish the installation, under the start menu, you should have the EdiSecure Connect available to be used.

1.  Please open the Administration Center.

Image Removed     

               a.   Add a Printer

Image RemovedImage Removed

              b.   Set the address to 1

Image Removed

...

  • CardExchange® Press

  • CardExchange® Visitor

Table of Contents

Table of Contents
stylenone

Installation via Native driver

  • ⚠️ Connect the printer to your computer only when prompted by the installer

  • Install the XID Native driver (available in the Matica product page for your specific printer)

  • When requested connect the printer back to your machine

  • Optionally install the Job Monitor (Prompted during installation)

Installation via EDIsecure Connect

Setup

  • In order to install a XID Series printer from Matica, you’ll need to install the EDIsecure Connect utility

    • This tool can be downloaded HERE

  • Extract the files and follow the steps provided during the setup process

  • After installing, under the Start menu, you should have a folder named EDIsecure Connect or Matica (depending on the installed version) with the tools available to be used

Configuration

  1. Under the Start menu, open the EDIsecure Connect/Matica folder and then click on Administration Center/Device Configurator

Image Added     

  1. In the tool that opens select you’ll be prompted to add a new device. If not click on New Printer on the top left corner of the utility

  2. Select the type of device that you are trying to add, in this case we’re selecting Printer

...

  1. Select the appropriate printer series

...

  1. Select the appropriate device model and port. The default value here is 1

...

  1. Return to the Start menu, and in the EDIsecure Connect/Matica folder open the Dispatcher/Job Monitor. Here you’ll be able to check if the printer is properly detected, its status and job queue.

           

                  a.    It should be correctly recognized if the circle in the left side is green, printer should be connected.

Image Removed

3.   After that, please open CardExchange select the correct printer and try to print.

Image Removed     

4.   If is needed to do magnetic encoding, please be sure that you have the Magnetic option selected under the printer driver.

...

  1. If correctly recognized it will be displayed with a green icon above it signalling that the printer is ready to work

...

Printing & Encoding

Printing with/without encoding

  1. With the printer now configured, please open your CardExchange®

  2. On the top menu click on Print and then click on Printer Options

  3. Select the appropriate printer and press OK

  4. Select the desired card template and on the top menu click on Print, then click on Print Card and confirm the print by pressing OK

  5. The card should be pulled into the printer and after a few seconds you’ll have your newly printed card

...

Magnetic encoding

  1. For magnetic encoding, go to the Windows Control Panel, enter the Devices and Printers section

  2. Select Printers & Scanners

  3. Select the appropriate printer

  4. Click on Printing Preferences

  5. On the configuration window that opened enable the Magstripe option

...

For further assistance, please do not hesitate to contact us support@cardexchangesolutions.com.