HID Fargo Connect
...
Open CardExchange® Controller, and go to configurations in the left pane.
Please note that these settings are moving to the CardExchange® Admin Center and can also be configured there.
Then click on the pencil icon in the top left to edit system configuration. Check the box that says ‘Print using HID Connect’
...
Server URL: Unless otherwise configured, the default URL that should be used is:
https://hfc-api.hidglobal.com:18443
For test and development instances of HID Fargo Connect, you should use this URL instead:
https://hfc-api-pi.hidglobal.com:18443
...
Certificate thumb: You will need to obtain your certificate and password from HID and send it to CardExchange Inc so that we can upload it in Azure, we can then provide you the correct Certificate Thumbprint to use.
The following settings only need to be set if the certificate is stored outside of our Azure instance.
Password: Password used to access the certificate.
...
Profile: These are the profiles that you have defined within CardExchange® Cloud Suite. Select the correct item from the dropdown box. Note: You can review, add, and edit the Profiles within Cloud Admin under Setup -> Controller CMS -> Profiles.
Click on ‘Save’ to save your settings and close the window.
...
Fields from ‘On Entity’ are the fields defined within CardExchange® Cloud Suite. Note: You can rename these fields from within CardExchange® Controller, Configurations -> System Labels
Click on ‘Save’ to save your settings and close the window.
...